美国Sparkfun原装 压力感应电阻 FSR406

 arduino fsr406 压力传感器 压力感应电阻 力敏电阻

sparkfun原装

    force sensing resistor是interlink electronics公司生产的一款重量轻，体积小，感测精度高，超薄型电阻式压力传感器。这款压力传感器是将施加在fsr传感器薄膜区域的压力转换成电阻值的变化，从而获得压力信息。压力越大，电阻越低。其允许用在压力0g-10kg的场合。可用于机械夹持器末端感测有无夹持物品，仿生机器人足下地面感测，哺乳类动物咬力测试生物实验，应用范围及其广泛。但是由于压力检测不是非常，因此不建议使用需要检测压力的场合。

体积小 感测精度高

dimensions（尺寸）:

overall length（总长度）: 3.5"
overall width（总宽度）: 1.75"
sensing area（检测范围）: 1.75x1.5"

背面自带粘胶 容易使用

description:

this is a force sensitive resistor with a square, 1.75x1.5", sensing area. this fsr will vary its resistance depending on how much pressure is being applied to the sensing area. the harder the force, the lower the resistance. when no pressure is being applied to the fsr its resistance will be larger than 1mω. this fsr can sense applied force anywhere in the range of 100g-10kg.

two pins extend from the bottom of the sensor with 0.1" pitch making it bread board friendly. there is a peel-and-stick rubber backing on the other side of the sensing area to mount the fsr.

these sensors are simple to set up and great for sensing pressure, but they aren't incredibly accurate. use them to sense if it's being s, but you may not want to use it as a scale.

相关文件下载：（复制链接到浏览器）

1.fsr integration guide
http://www.sparkfun.com/datasheets/sensors/pressure/fsrguide.pdf 

2.bildr tutorial
http://bildr.org/2012/11/force-sensitive-resistor-arduino/

本产品的加工定制是否，品牌是Sparkfun，型号是RB-02S061，种类是压力，制作工艺是薄膜，输出信号是模拟型，货号是RB-02S061